Signal Splitters & Amplifiers


Drago Automation

6mm Series


Standard Signal AI Module DMB 96100

Input signal: 0 to 20 mA, 4 to 20 mA
0 to 10 V, 2 to 10 V
0 to 5 V, 1 to 5 V
Bus protocol: Modbus RTU
Power supply: 24 V DC
Features: Protective Separation, housing width: 6.2 mm

Universal AI/DI Module DMB 96500

Sensor input: Standard signals: 0/4 to 20 mA, 0/2 to 10 V, 0/1 to 5V
Current: ±1 mA, ±20 mA, ±100 mA
Voltage: ±1 V, ±10 V, ±100 V, ±300 V
mV/Shunt Voltage: ±50 mV, ±100 mV, ±500 mV
Resistance: 5 kΩ, 20 kΩ, 100 kΩ
Potentiometer: 500 Ω, 3 kΩ, 50 kΩ, 100 kΩ
Pt: Pt100 ... Pt 10000, JPt50, JPt100
Ni: Ni100 ... Ni1000
KTY: 66 Industrietypen
Thermocouple: A,B,C,D,E,J,K,L,N,R,S,T,U
Binary-/Switching input: PNP, NPN, Push-Pull, Contact, NAMUR, S0-Switch
Bus protocol: Modbus RTU
Power supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm

4 Channel DI/DO Module DMB 96700

Input signal: 5V / 12V / 24V level
binary, frequency, counter
Output: Open collector
binary, frequency, pulse, PWM
Bus protocol: Modbus RTU
Power supply: 24 V DC
Features: Protective Separation, housing width: 6.2 mm

4 Channel Relay Module DMB 96800

Output: SPST Power Relay
250 V AC / 30 V DC / 2 A
Bus protocol: Modbus RTU
Power supply: 24 V DC
Features: Protective Separation, housing width: 6.2 mm

Bipolar Isolation Amplifier DB 64000

Input: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Output: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Power supply: 24 V DC
Features: calibrated signal setting, zero/span compensation,
protective separation, housing width: 6.2 mm

Repeater Power Supply DC 52100

Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, calibrated switchable
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, calibrated switchable
Power supply: 24 V DC
Features: Protective separation, housing width: 6.2 mm

Repeater Power Supply HART DC 52500

Input: 0/4 to 20 mA Energization of 2-wire transmitters
Output: 0/4 to 20 mA Bidirectional HART communication
Power supply: 24 V DC
Features: Protective separation, housing width: 6.2 mm

Passive Isolator DH 11000

Input: 0(4) to 20 mA 1- or 2-channel
Output: 0(4) to 20 mA
Voltage drop: < 2.3 V
Features: Protective separation, housing width: 6.2 mm

Signal Splitter/Repeater DN 21000

Input: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Output 1: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Output 2: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Power supply: 24 V DC
Features: PCalibrated signal setting, protective separation,
housing width: 6.2 mm

Isolation Amplifier DN 25000

Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, calibrated switchable
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V, calibrated switchable
Power supply: 24 V DC
Features: Calibrated signal setting, protective separation, housing width: 6.2 mm

Shunt / mV Isolation Amplifier DS 75000

Input: 0 to ±60 mV, 0 to ±100 mV, 0 to ±150 mV, 0 to ±250 mV, 0 to ±300 mV, 0 to ±500 mV
Output: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Power supply: 24 V DC
Features: signal setting with DIP switches, zero/span compensation,
protective separation, housing width: 6.2 mm

Temperature Transmitter DT 45000

Sensor Input: Resistors: Pt 100, Pt 200, Pt 500, Pt 1000, Ni 100, Ni 200, Ni 500, Ni 1000;
Thermocouple: B, E, J, K, L, N, R, S, T, U, W5Re_W26Re, W3Re_W25Re;
KTY, resistor, mV and potentiometer measuring
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 mA, 2 to 10 mA
0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
Measurement Ranges: -270 to +2315 °C, according to sensor type
Power supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm

Pt Temperature Transmitter DT 45200

Sensor Input: Pt 100, Pt 200, Pt 500, Pt 1000, Pt 2000
JPt 50, JPt 100
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V
Measurement Ranges: -200 to +850 °C, according to sensor type
Power supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm

Ni Temperature Transmitter DT 45400

Sensor Input: Ni 100, Ni 200, Ni 500, Ni 1000 acc. DIN 43760 (TK6180)
Ni 120 (TK6720), Ni 1000 (TK5000), Ni 1000 (TK6370)
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V
Measurement Ranges: -50 to +250 °C, according to sensor type
Power supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm

KTY Temperature Transmitter DT 45600

Sensor Input: Measuring input for all KTY temperature sensors
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V
Measurement Ranges: -50 to +300 °C, according to sensor type
Power supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm

TC Temperature Transmitter DT 45800

Sensor Input: Thermocouple Type A, B, C, D, E, J, K, L, N, R, S, T, U
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V
Measurement Ranges: -200 to +2500 °C, according to type of thermocouple
Power supply: 24 V DC
Features: Protective Separation, Housing width: 6.2 mm

High Functionality Series


Bipolar Isolation Amplifier DB 6200

Input: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Output: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Power supply: Modbus RTU
20 to 253 V AC/DC 24 V DC
Features: Pluggable screw clamp terminals, zero/span compensation,
protective separation, housing width: 12.5 mm

Filter Isolation Amplifier DB 6230

Input: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Output: 0 to ±20 mA, 0 to ±10 V
Filter function Cut-off frequency: 10 Hz, 1 Hz, 0.5 Hz, 0.1 Hz
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation,
protective separation, housing width: 12.5 mm

Inverse Isolation Amplifier DB 6250

Input: 0 to 20 mA, 0 to 10 mA, 0 to 10 V, 0 to 5 V, live/dead-zero
Output: 0 to 20 mA, 0 to 10 mA, 0 to 10 V, 0 to 5 V, live/dead-zero
Characteristic: inverse characteristic
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation,
protective separation, housing width: 12.5 mm

Passive Isolator DH 1000

Input: 0(4) to 20 mA 1- or 2-channel
Output: 0(4) to 20 mA
Voltage drop: < 2.0 V
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, protective separation,
housing width: 12.5 mm

Customer-Specific Isolation Amplifier DK 8000

Input: customer-specific
Output: customer-specific
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation optional,
protective separation, housing width: 12.5 mm

Isolation Amplifier DN 2000

Input: 0...20 mA, 4...20 mA, 0...10 V
Output: 0...20 mA, 4...20 mA, 0...10 V
Power supply: 20 ... 253 V AC/DC
Features: Pluggable screw clamp terminals, calibrated signal setting,
protective separation, housing width: 12.5 mm

Isolation Amplifier DN 2300

Input: 0(4) to 20 mA
Output: 0(4) to 20 mA
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation,
protective separation, housing width: 12.5 mm

Isolation Amplifier DN 2400

Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, calibrated signal setting,
housing width: 12.5 mm

Potentiometer Transducer DR 4310

Input: Potentiometer, 500 Ohm to 100 kOhm
Output: 0 to 20 mA, 4 to 20 mA, ±20 mA, 0 to 10 mA, 2 to 10 mA, ±10 mA
0 to 10 V, 2 to 10 V, ±10 V, 0 to 5 V, 1 to 5 V, ±5V
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation,
protective separation, housing width: 12.5 mm

Temperature Transmitter DR 4700

Sensor input: Pt 100, Pt 1000
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Ranges: -100 to +600 °C
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, sensor diagnostics, protective separation, housing width: 12.5 mm

Shunt / mV Isolation Amplifier DS 7200

Input: 0 to ±60 mV, 0 to ±100 mV, 0 to ±150 mV, 0 to ±250 mV, 0 to ±300 mV, 0 to ±500 mV
Output: 0 to ±20 mA, 0 to ±10 mA, 0 to ±10 V, 0 to ±5 V, live/dead-zero
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, zero/span compensation,
protective separation, housing width: 12.5 mm

Shunt / mV Isolation Amplifier DS 7400

Input: 0 to 60 mV, 0 to 150 mV
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Power supply: 20 to 253 V AC/DC
Features: Pluggable screw clamp terminals, calibrated signal setting, housing width: 12.5 mm

Tiny Snap Series


Bipolar Isolation Amplifier DB 68

Input: ±10 V, ±5 V, ±20 mA, ±10 mA,
0 to 10 V, 0 to 5 V, 0 to 20 mA,
2 to 10 V, 1 to 5 V, 4 to 20 mA
Output: 0 to 10 V, 0 to 5 V, 0 to 20 mA,
2 to 10 V, 1 to 5 V, 4 to 20 mA
Power supply: 24 V AC/DC
Features: Protective separation, housing width: 11.2 mm

Passive Transmitter Repeater DC 58

Input: 4 to 20 mA
Output: 4 to 20 mA
Voltage drop: Approx. 4.7 V
Features: Protective separation, housing width: 11.2 mm

Passive Isolator DH 18

Input: 0(4) to 20 mA 1- and 2-channel versions
Output: 0(4) to 20 mA
Voltage drop: < 3 V
Features: Protective separation, housing width: 11.2 mm

Isolation Amplifier DN 28

Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
Power supply: 24 V AC/DC
Features: Protective separation, housing width: 11.2 mm

Resistance Transmitter DR 41

Mesuring ranges: Fixed ranges within 20 Ohm ... 1 MOhm, see product line
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Power supply: 24 V AC/DC
Features: Protective Separation, housing width: 11.2 mm

Temperature Transmitter DR 44

Sensor input: Pt 100, 4-wire connection
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Ranges: -100 to +450 °C (32 Types)
Power supply: 24 V AC/DC
Features: Protective Separation, housing width: 11.2 mm

Temperature Transmitter DR 48

Sensor input: Pt 100, 2- or 3-wire connection
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Ranges: -100 to +450 °C (32 types)
Power supply: 24 V AC/DC
Features: Protective Separation, housing width: 11.2 mm

Temperature Transmitter DR 49

Sensor input: Pt 1000, 2- or 3-wire connection
Output: 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V
Ranges: -100 to +450 °C (32 types)
Power supply: 24 V AC/DC
Features: Protective Separation, housing width: 11.2 mm

Shunt / mV Isolation Amplifier DS 78

Input: 0 to ±60 mV, 0 to ±100 mV, 0 to ±150 mV, 0 to ±300 mV
Output: 0 to 10 V, 2 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA
Power supply: 24 V AC/DC
Features: Protective separation, housing width: 11.2 mm

Alarm Unit Series


Alarm Unit DG 3200

Input: Standard signals 0(4) to 20 mA, ±20 mA, 0 to 10 V, ±10 V (switchable)
Output: 250 V AC/DC, 6 A
Power supply: 24 V AC/DC
Features: Relay with high power handling, protective separation,
housing width: 22.5 mm

Current Measuring Contactor DG 3300

Input: 0 to 1 A, ±1 A, 0 to 5 A, ±5 A (switchable)
Output: 250 V AC/DC, 6 A
Power supply: 24 V AC/DC
Features: Relay with high power handling, protective separation,
housing width: 22.5 mm

Voltage Measuring Contactor DG 3400

Input: 24 V, 48 V, 100 V, 120 V, 250 V, 500 V (switchable)
Output relays: 250 V AC/DC, 6 A
Power supply: 24 V AC/DC
Features: Relay with high power handling, protective separation,
housing width: 22.5 mm

Temperature Alarm Unit DG 3600

Sensor input: Pt100, Pt200, Pt500, Pt1000 (switchable)
Output relays: 250 V AC/DC, 6 A
Power supply: 24 V AC/DC
Features: Relay with high power handling, protective separation,
housing width: 22.5 mm

Analog Embedded Series


Isolation Amplifier Module DN 240M

Input: 0 to 20 mA, 4 to 20 mA, 0 to 10 V terminal selectable
Output: 0 to 20 mA, 4 to 20 mA, 0 to 10 V terminal selectable
Power supply: 24 V AC/DC
Features: solder-in module, Calibrated signal setting, 3-port isolation,
flat module housing for PCB assembling

©2018. F S INTL. AND INDUSTRIAL CORP.
Site design and maintenance by Watta Studio.